Product ID:ROSIN CORE SOLDER
MSDS Date:09/26/1991
FSC:3439
NIIN:01-008-7577
MSDS Number: BJMGP

BOW SOLDER PRODUCTS CO INC

900 HOBSON ST
UNION, NJ 07083
US

Emergency Phone: 201-686-6040

Info Phone: 800-526-4496

Cage: 52329

BOW ELECTRONIC SOLDERS

SAYREVILLE, NJ 08872 US

Telephone: 732-316-2177

Cage: 52329

TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: <100%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9192

LEAD (SARA III)

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: <100%

OSHA PEL 0.05 MG/M3;1910.1025

ACGIH TLV: 0.15 MG/M3;DUST 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

ANTIMONY (SARA III)

CAS: 7440-36-0

RTECS: CC4025000

Fraction By Weight: <2%

OSHA PEL 0.5 MG/M3

ACGIH TLV: 0.5 MG SB/M3; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

BISMUTH

CAS: 7440-69-9

RTECS: EB2600000

Fraction By Weight: <1%

COPPER (SARA III)

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: <2%

OSHA PEL 0.1MG/M3 FUME/1 DUST

ACGIH TLV: 0.2MG/M3 FUME; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

ARSENIC (SARA III)

CAS: 7440-38-2

RTECS: CG0525000

Fraction By Weight: <1%

OSHA PEL 0.5 MG/M3 (AS)

ACGIH TLV: 0.01,A1 MG/M3; 9394

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

IRON

CAS: 7439-86-6

RTECS: NO6925000

Fraction By Weight: <1%

ALUMINUM (SARA III)

CAS: 7429-90-5

RTECS: BD0330000

Fraction By Weight: <1%

OSHA PEL 15MG/M3 DUST/5 FUME

ACGIH TLV: 10MG/M3 DUST; 9192

ZINC (SARA III)

CAS: 7440-66-6

RTECS: ZG8600000

Fraction By Weight: <1%

OSHA PEL 10 MG ZNO/M3

ACGIH TLV: 10 MG ZNO/M3; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

ROSIN ACID

CAS: 8050-09-7

Fraction By Weight: <3%

DIPROPYLENE GLYCOL

CAS: 110-98-5

RTECS: UB8785000

Fraction By Weight: <1%

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: WHILE IT IS POSSIBLE FOR LEAD
TAKEN IN EXTREMELY LARGE DOSES TO CAUSE ENCEPHALOPATHY, A BRAIN
CONDITION THAT CAN RESULT IN SEIZURES, COMA AND DEATH, EXPOSURES OF
THIS MAGNITUDE ARE HIGHLY UNUSU AL. CHRONIC: MAY RESULT IN DAMAGE
TO THE BLOOD-FORMING, NERVOUS, URINARY AND REPRODUCTIVE SYSTEMS.
Explanation of Carcinogenicity:NOT LISTED BY NTP, IARC OR OSHA AS A
CARCINOGEN. ARSENIC IS KNOWN TO BE CARCINOGENIC AND IS PRESENT IN
TRACE AMOUNTS.
Effects of Overexposure:LOSS OF APPETITE, METALLIC TASTE IN THE MOUTH,
ANXIETY, CONSTIPATION, NAUSEA, PALLOR, EXCESSIVE TIREDNESS,
WEAKNESS, INSOMNIA, HEADACHE, NERVOUS IRRITABILITY, MUSCLE AND
JOINT SORENESS, TREMORS, DIZZI NESS, ABDOMINAL PAIN, JOINT
PAIN/WEAKNESS, WEIGHT LOSS,LEAD LINE ON GUMS, MENTAL CONFUSION.
Medical Cond Aggravated by Exposure:DISEASES OF THE BLOOD-FORMING,
NERVOUS, URINARY AND REPRODUCTIVE SYSTEMS. EXPOSURE TO LEAD MAY
RESULT IN INJURY TO A DEVELOPING FETUS. WOMEN OF CHILD BEARING AGE
SHOULD AVOID EXPOSURE TO LEAD.

First Aid:IF A PERSON BREATHES IN A LARGE AMOUNT OF DUST OR FUMES,
REMOVE FROM EXPOSURE. IF BREATHING HAS STOPPED, PERFORM ARTIFICIAL
RESPIRATION. CALL A PHYSICIAN. IF LEAD HAS BEEN INGESTED, GIVE
LARGE AMOUNTS OF WATER IF THE INDIVIDUAL IS CONSCIOUS. CALL A
PHYSICIAN. IF LEAD GETS IN EYES, FLUSH WITH A LARGE AMOUNT OF
WATER. CALL A PHYSICIAN. TREAT MOLTEN METAL BURNS AS ORDINARY BURN
FIRST AID.

Extinguishing Media:USE CARBON DIOXIDE, FOAM, OR DRY CHEMICAL AS
APPROPRIATE FOR SURROUNDINGS. DO NOT USE WATER ON MOLTEN METAL.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCBA &
FULL PROTECTIVE EQUIPMENT WHEN FIGHTING CHEMICAL FIRE. USE WATER
SPRAY TO COOL NEARBY CONTAINERS EXPOSED TO FIRE.
Unusual Fire/Explosion Hazard:MOLTEN METALS PRODUCE FUME OR VAPOR THAT
MAY BE TOXIC AND/OR RESPIRATORY IRRITANTS. REACTS VIOLENTLY WITH
OXIDIZING AGENTS.

Spill Release Procedures:CLEAN UP BY VACUUMING TO MINIMIZE DUST
EXPOSURE. PROVIDE CLEAN UP EMPLOYEES WITH NIOSH/MSHA APPROVED
RESPIRATOR FOR DUSTS/MISTS IF THE POSSIBILITY FOR EXPOSURE TO DUST
OR FUMES EXISTS.

Handling and Storage Precautions:PRACTICE GOOD HOUSEKEEPING TO PREVENT
ACCUMULATION OF DUST. DO NOT SMOKE OR EXPOSE FOOD OR DRINK TO DUST.
WASH HANDS AFTER HANDLING.
Other Precautions:REFER TO OSHA STANDARD 29CFR 1910.1025 FOR LEAD
EXPOSURE CONTROL. USE FACE SHIELD IF DANGER FROM MOLTEN METAL.MFR
RECOMMENDS VENTILATION >200FT/MIN. DO NOT USE COMPRESSED AIR OR DRY
SWEEPING CLEANING SYSTEMS.

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR FOR LEAD, IF
EXPOSURES EXCEED THE OSHA LIMIT.
Ventilation:USE ADEQUATE MECHANICAL VENTILATION.
Protective Gloves:LEATHER GLOVES
Eye Protection:OSHA APPROVED SAFETY GLASSES.
Other Protective Equipment:SAFETY EYEWASH STATION
Work Hygienic Practices:WASH HANDS THOROUGHLY BEFORE EATING OR SMOKING.
LAUNDER CONTAMINATIED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
EXPOSURE TO LEAD IS REGULATED BY OSHA 1910.1025. THIS MSDS CONTAINS
INGREDIENT DATA FROM OLD MSDS. BOILING POINT/MELTING POINT DATA ARE
FOR THE CORE MATERIAL.

HCC:N1
Boiling Pt:B.P. Text:482F,250C
Melt/Freeze Pt:M.P/F.P Text:482F,250C
Vapor Pres:NEGLIGIBLE
Spec Gravity:7.3-11.3 METAL
Solubility in Water:INSOLUBLE
Appearance and Odor:CORE:CLEAR SOLID AT ROOM TEMP.WITH LIGHT ROSIN
ODOR. SOLDER:METALLIC SHINY SOLI

Stability Indicator/Materials to Avoid:YES
ACIDS, BASES AND OXIDIZERS. MOLTEN METAL MAY REACT VIOLENTLY WITH
WATER.
Stability Condition to Avoid:VERY HIGH TEMPERATURES, (SPARKS OR OPEN
FLAMES AROUND METALLIC DUST)
Hazardous Decomposition Products:LEAD OXIDE AND ANTIMONY OXIDE FUMES
EVOLVED AT TEMPERATURES >1000F. BASE METAL FUMES ALSO EVOLVED.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE &
LOCAL LAWS AND REGULATIONS. SCRAP DRIPPINGS AND DROSSES SHOULD BE
KEPT IN A CLOSED CONTAINER AND RETURNED TO LEAD RECYCLER. CONTACT
LOCAL ENVIRONMENTAL M ANAGER.CONTAINS MATERIALS REGULATED UNDER
SARA III

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.